Privacy statement: Your privacy is very important to Us. Our company promises not to disclose your personal information to any external company with out your explicit permission.
Product Categories
Polyurethane Paving Materials
(Total 12 Products for Water Based Breathable Running Track)
SFC-12 is a two-component reaction solidification synthetic polymer runway spray fabric, SFC-12A component by the combination of polyether polyol, plasticizer, crosslinking agent, filler and other refined from.A polyurethane prepolymer prepared by polymerization of polyether polyol and diisocyanate. Specifications:...
Main ingredients: Main paint, curing agent ( red) Specifications: 20kg/ group (sqm-a :18.75kg, sqm-b :1.25kg) Service temperature: 5 ℃ to 35 ℃ Ratio used: Weight ratio sqm-a: sqm-b = 15:1 Example: sqm-a: 18.75kg, sqm-b: 1.25kg, 0.3kg quartz sand, and about 3kg pure water (the total amount of AB is about 15% and...
Main ingredients: Main paint, curing agent ( blue) Specifications: 20kg/ group (sqm-a :18.75kg, sqm-b :1.25kg) Service temperature: 5 ℃ to 35 ℃ Ratio used: Weight ratio sqm-a: sqm-b = 15:1 Example: sqm-a: 18.75kg, sqm-b: 1.25kg, 0.3kg quartz sand, and about 3kg pure water (the total amount of AB is about 15% and...
Main ingredients: Main paint, curing agent (mainly red, green and blue) specification: 20kg/group (SQM-A: 18.75kg, SQM-B: 1.4kg) Operating temperature: 5°C-35°C Use ratio: Weight ratio SQM-A: SQM-B=13.4:1 Example: SQM-A: 18.75 kg, SQM-B: 1.4 kg, quartz sand 0.3 kg, pure water about 3 kg (about 15% of AB total,...
specification: 20kg/group (QM-A: 10kg, QM-B: 10kg) Use ratio: Weight ratio QM-A: QM-B=1:1 Example: QM-A: 10 kg, QM-B: 10 kg, quartz sand 0.6-1 kg (AB total 3-5%, temperature below 15 °C can add appropriate amount of catalyst) Instructions: (Material ratio) QM-B----QM-A----Quartz sand is fully stirred and sprayed...
The colored pavement is used to paint the original pavement into various colors to mark special areas, guide road sections, decoration, and area division. The water-based materials produced by our company have no toxic substances and can be used safely for all kinds of pavements and beautify the roads. Easy to...
Anti-graffiti paint is a kind of paint with special surface function. The surface has low surface tension. The lotus leaf surface has self-cleaning effect, the dirt naturally rolls off, and the self-adhesive paper will easily fall off after being attached. As we all know, street advertising has become an incurable...
Colourful Synthetic Silicon PU Water-based Courts Sports Surface Flooring Athletic Running Track
1, polished. Polish the concrete cement foundation to smooth it. 2. Pickle the ground. Clean the concrete floor - clean the water and soak the ground - clean with 8% dilute hydrochloric acid - rinse with clean water (restore the original color of the cement floor) - dry, no white powder and floating material on the...
Waterborne polyurethane topcoat Construction points: accurate mixing and even thin coating construction Construction ratio: A: B = 15:1 1. Before use, stir the A component evenly, then pour it into a clean mixing tank, while stirring the A component, slowly add the B component curing agent, and add an appropriate...
Colourful Water-based runway top coat Courts Sports Surface Flooring Athletic Running Track
Waterborne polyurethane topcoat Instructions for use and precautions Key points: Properly mix and evenly spread thin coating construction. The surface of the base layer should be kept clean before construction, and no pollutants are allowed. All contaminants such as fats, greases, paint residues, chemicals and...
Water permeable adhesive stone Courts Sports Surface Flooring Athletic Running Track
Water permeable adhesive stone Operating process First, the ratio A: B = 1:1 Colored stones: Adhesive = 40:1 Second, the process The first step: the selection of adhesive stone 1, polished through the screening of various colors of washed stone particle size 3-5 mm best 2, the color should try to avoid the choice of...
SGS IAAF Certificated Courts Sports Surface Flooring Athletic Running Track
The 13mm ventilated plastic runway construction process is a two-step construction method. The bottom layer of the granules was laid to a thickness of 10-11 mm. After curing, a PU adhesive layer of EPDM particles having a thickness of 2-3 mm was sprayed thereon. (Note: If the height of the site is not uniform, the...
Categories
High Quality Products
Send Us a Message
We didn't put all products on website. If you can't find the product you're looking for, please contact us for more information.
Privacy statement: Your privacy is very important to Us. Our company promises not to disclose your personal information to any external company with out your explicit permission.
Fill in more information so that we can get in touch with you faster
Privacy statement: Your privacy is very important to Us. Our company promises not to disclose your personal information to any external company with out your explicit permission.